Laser

Specially designed to fit the fork caps found on the Öhlins NPX 43 forks fitted with Smart Electronic Control (S-EC). The socket has seven pin conf...

A large bridge-type dent puller, measuring 900mm in length with clearance between the working surface and the bottom of the beam of 175mm, with a p...

The post 2018 Mercedes-Benz Sprinter vans use a large diameter plastic fixing nut to hold the front suspension struts in place. Access to the strut...

A simple lever/puller tool designed to allow quick and easy removal of wiper arms. Place hook under the base of the wiper arm and place the pivot p...

A JIS 10-piece bit set with 1/4" hex shanks & quick chuck ends to allow fast secure connection to 1/4" hex drivers. Suitable for use with cordl...

Designed to easily and quickly attach to a vehicle wheel, allowing the user to easily move the wheel up and down or left to right to feel and look ...

The Power-TEC 92720 is a simplified trammel (tram) gauge for the fast checking of critical measuring points on a vehicle. Length: 1.86m. Extendable...

A digital compression tester for testing petrol engines via the spark plug hole. The kit includes an easy to read digital gauge, extension pipes an...

A spare/replacement abrasive cleaning pad specifically for the Laser inner wheel cleaner, Part No. 9170. Also suitable for use with Laser 8805 hub ...

A fully insulated 11mm Bi-Hex (12pt) ratchet ring spanner for working on hybrid and electric vehicles, suitable for live working up to 1000V AC/ 15...

Injector extractor adaptor specifically designed to allow the use of Laser diesel injector air hammer extraction kit (Part No. 6263) or Laser in-li...

A fully insulated slimline long reach, 3/8” drive, T40 Star* socket bit, suitable for use on restricted access TORX* fixings as found on EV batteri...

Designed to aid the fitting of stretchy belts to Ford engines. Stretchy belts are identified by not having a spring-loaded idler pulley. Can be us...

A 3/4"D ratchet with a reversible 120 teeth mechanism, with the added advantage of including three dual purpose extension bars that can be assemble...

A set of five crows foot wrenches, in 22mm, 24mm, 27mm, 30mm and 32mm sizes, suitable for use on; track rod end fixings, large hexagon pipe and lin...

A simple and fast-to-use set of threaded sockets, extraction punch and fitting bearing. For extraction, simply part screw the relevant socket on an...

A pair of pliers with specially shaped jaws to allow the user to access and release the heater hose clamps used on Ford vehicles. For use on Ford ...

A manually operated vacuum fluid extractor with a 10 litre capacity. It is suitable for extracting all types of lubricating oils used in cars, moto...

Bonnet and boot struts often do not lock out at full travel or can sag over a period of time. The Laser 9134 lift support clamp allows a strut to b...

Engine timing kit for the latest 3 cylinder Fiat 1.0L petrol engine, as used in Fiat Mild Hybrid Electric Vehicles (MHEV). Applications include: F...

An 85mm impact socket designed specifically to remove the hub nut on Iveco axles requiring a 12-point (Bi-Hex) socket. Applications: Iveco vehicle...